This is a great mid priced mic. It is the perfect upgrade from an inexpensive mic.

Audio-Technica AT803 Omnidirectional Condenser Lavalier Microphone Features:

  • Designed for clip-on lavalier and musical instrument use
    Small size is ideal for applications requiring minimum visibility
    Operates on battery or phantom power
    6′ (1.8 m) cable permanently attached to mic, TA3F connector at power module

Audio-Technica AT803 Omnidirectional Condenser Lavalier Microphone Specifications:

Element: Fixed-charge back plate, permanently polarized condenser
Polar pattern: Omnidirectional
Frequency response: 30-20,000 Hz
Low frequency roll-off: 80 Hz, 18 dB/octave
Open circuit sensitivity:
Phantom: —45 dB (12.5 mV) re 1V at 1 Pa
Battery: —46 dB (11.2 mV) re 1V at 1 Pa
Impedance:
Phantom: 200 ohms
Battery: 270 ohms
Maximum input sound level:
Phantom: 135 dB SPL, 1 kHz at 1% T.H.D.
Battery: 121 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical):
Phantom: 106 dB, 1 kHz at Max SPL
Battery: 92 dB, 1 kHz at Max SPL
Signal-to-noise ratio: 72 db, 1 kHz at 1 Pa
Phantom power requirements: 11-52V DC, 2 mA typical
Battery type: 1.5 AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Weight (microphone): .09 oz. (2.5 g)
Weight (power module): 4.9 oz. (139 g)
Dimensions (microphone): 0.81″ (20.5 mm) long, 0.39″ (10.0 mm) diameter
Dimensions (power module): 3.13″ (84 mm) H x 2.48″ (63.0 mm) W x .87″ (22.0 mm) D
Output connector (power module): Integral 3-pin XLRM-type
Cable: 6′ (1.8 m) long (permanently attached to microphone), 0.10″ (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories furnished: AT8417 clothing clip; AT8531 power module; AT8116 windscreen; battery; protective carrying case
Audio-Technica case style: M1

AT803 Omnidirectional Condenser Lavalier Microphone – Affiliate Link

 

Hosa XVM-110M Right Angle 3.5mm TRS to XLR3M 10 Ft  – Affiliate Link